Jasco Enbrighten Z-Wave No Neutral Smart Dimmer review
Our Verdict
The Jasco Z-Wave No Neutral Smart Dimmer is an easy mode to update your dimming fixtures—only don't expect it to exercise much else without some tinkering.
For
- Very piece of cake installation
- Agnostic Load/Line Terminals
- Clean appearance and overnice button feel
- Lots of confirmed smart home compatibility
Against
- No manufacturer-created device handler, limited out-of-the-box features.
- No separate dimming controls
- No included wall plate
- QR code S2 security setup is finicky
Tom'southward Guide Verdict
The Jasco Z-Moving ridge No Neutral Smart Dimmer is an easy style to update your dimming fixtures—but don't expect information technology to do much else without some tinkering.
Pros
- +
Very like shooting fish in a barrel installation
- +
Agnostic Load/Line Terminals
- +
Clean advent and prissy push button experience
- +
Lots of confirmed smart home compatibility
Cons
- -
No manufacturer-created device handler, limited out-of-the-box features.
- -
No dissever dimming controls
- -
No included wall plate
- -
QR code S2 security setup is finicky
Jasco Z-Wave No Neutral Smart Dimmer: Specs
Dimensions: four.1 x 1.75 10 i.5 inches
Wireless Protocol: Z-Moving ridge
Wireless Frequency: 908.iv/916 MHz
Dimmable: Yes
Neutral Required? No
Works With: Google Home, Amazon Alexa, SmartThings, Wink, HomeSeer, Vivint, etc.
WiFi: No
S2 Security Compatible: Yes
Move Sensor: No
If y'all have several fixtures connected to a single switch, a smart lite switch such equally Jasco'due south Enbrighten Z-Wave No Neutral Smart Dimmer is a practiced option. It's similar to some GE smart lite switches, but with a primal, merciful difference: this one dispenses with the neutral wire, meaning you need only connect the line, load, and ground wires, making it imminently more DIY-friendly in most installations than your average in-wall smart switch.
For this Jasco Enbrighten Z-Wave No Neutral Smart Dimmer review, I tested this switch on an Aeotec Smart Things Hub V3 — one of the best smart domicile hubs — so this review will be through the lens of working with that item hub.
Enbrighten Z-Wave No Neutral Smart Dimmer review: Design
Easy to install and elementary to use, this Enbrighten Z-Wave dimmer is a straightforward, no-frills experience. If non for the small condition LED at the bottom, it would be hard to pick it out from a standard paddle switch. There are no sliders or separate paddles/buttons on this dimmer: adjusting the effulgence involves pressing and holding the elevation or bottom of the paddle downwards, and waiting. Information technology's a clean look, merely I don't know that information technology's necessarily worth giving up divide dimming controls. The buttons themselves are nice and clicky, which I prefer over the somewhat squishy matter offered past other smart switches. On the bottom, a small-scale tab lets you cut power to the switch past pulling it out.
If the color of the paddle, which is white, doesn't piece of work for you, an almond paddle is included in the box, and other colors are available on Jasco's website. That was a overnice actress, only I was surprised to find no wall plate in the box. If you've been toying with smart switches for a while like me, yous probably take a few lying around, but if you don't, you should know you lot'll need to buy one. And so you lot might likewise choice up a fancy brass pineapple-endowed wall plate, like I did.
On the dorsum of the switch, yous're presented non with screw-down clamps or colored wires; instead there are only holes labeled "load/line", "ground", and "Traveler." Of course, these holes are where you poke your house's wiring when it comes time to install the switch, and it'due south this, along with the small-scale box containing all the dimmer's guts, that really makes this switch shine.
Enbrighten Z-Wave No Neutral Dimmer review: Features and installation
For amend or worse, Jasco doesn't seem to have a SmartThings handler (more on what a handler is in a bit, but in short it is custom lawmaking to operate the light). The switch will however work out of the box with your SmartThings hub, but y'all shouldn't expect broad functionality without some tinkering. There are no multi-tap or long-press deportment available here; from your phone, yous can toggle information technology, schedule it, automate it, adjust a brightness slider, or tap one of five pre-configured brightness settings. In fact, the default killer features of this switch are non software-based at all.
In a typical calorie-free switch installation, you will have iv wires to deal with: two black (load and line), one white (neutral) and one bare copper (or green-sheathed) basis wire. For most switches, you need to figure out which of the ii blackness cables supplies power to the switch, and which carries that power from the switch to the lite. These are known as the line and load respectively, and if y'all mix them up, most smart switches only won't work. However, this Enbrighten dimmer has no such limitation—its load and line terminals are doubter, with the switch automatically detecting incoming ability and configuring itself automatically to employ the appropriate last and nevertheless provide proper, safety grounding and protection.
This combined with the slim housing of the dimmer makes for a switch that isn't just easy to install, merely brings with it peace of heed: whatsoever homeowner working on a upkeep will be quite familiar with the feet-ridden moment that is flipping the power dorsum on (you lot did turn off the switch's power at the breaker when yous started, didn't you?) and rushing dorsum over to brand sure there'south no indication of wires that oughtn't bear on having cozied up when you pushed the switch into the wall. No corporeality of conscientious, patient wire arrangement and folding has, at to the lowest degree in my experience, managed to convince me I haven't fix a burn run a risk in one case the wires are out of sight, but this switch's simple installation comes close, and that is worth a lot to me.
Enbrighten Z-Wave No Neutral Dimmer review: Performance
After installing the switch, its use is pretty bones: printing the top paddle to turn on the switch or hold it to raise the effulgence, and accomplish the opposite by doing the same on the bottom. I establish the switch's irksome default ascent to total brightness or drop to off to be a touch too slow, but this is only a minor quibble, and fixable if you like to tinker with custom device handlers, which can be installed via the SmartThings Integrated Evolution Environment in your PC web browser (If this seems confusing, encounter this helpful guide written up past a forum member of the SmartThings community).
For those not in the know, one of the benefits of Z-Wave devices is that if you lot don't like the options you have for decision-making a device, you can change its behavior and options by copying—or writing—code for what's known as a "device handler." Z-Moving ridge has a rich community of tinkerers who have written code for any device you can think of, and so it's absolutely worth looking into this world if you lot're the curious, adventurous blazon.
At that place are some downsides, however. Custom handlers can add more advanced features like multi-tap and long-press, but some features not officially supported by your switch volition have to be executed in the deject, rather than at the local level, which is not as fast and potentially makes the device vastly more than finicky. I toyed with some custom handlers during this review, and some were amend than others, but ultimately I just used them to change some avant-garde settings that are otherwise inaccessible, then moved back to a generic Z-Wave Dimmer handler.
If y'all don't want to mess with custom handlers and only want the basic experience, merely you find that your fixture is flickering at lower or higher brightness settings, you can configure the maximum and minimum brightness through a somewhat fussy serial of button-presses as laid out in the transmission.
Enbrighten Z-Moving ridge No Neutral Dimmer review: Setup
Jasco's Z-Wave dimmer setup was straightforward in my testing: open the SmartThings app, tap the + sign in the upper right-hand corner, follow the prompts, one of which allows yous to securely add your switch. The QR code for this can be accessed either via the front end of the switch, before you put on the wall plate, or it tin be constitute on the box your switch came in. I had trouble getting this to work when trying by brand, but using the QR scanner from the brand selection screen was successful, registering the switch every bit a generic Z-Wave dimmer.
Alternately, of class, you lot can also simply scan for the switch, which the SmartThings app warns you is a less secure method, and not recommended.
Enbrighten Z-Wave No Neutral Dimmer Review: Bottom line
Also screwing in a smart bulb, the Enbrighten Z-Moving ridge No Neutral Dimmer is possibly the virtually foolproof smart switch on the market. For an experienced person working with reasonable electricals, setup can exist complete in under 10 minutes, with no actress crimping, twisting, or tightening—I had more trouble removing the switch information technology replaced, in fact. Non needing to trace wires or check and double-check your work (assuming you at to the lowest degree know for sure you're working with the load and line wires) goes a long mode towards justifying its cost.
However, if you're looking for a dimmer that has a rich, feature-packed experience, this i may accept some digging as you may have to burn through a few custom device handlers before you settle on one you like; and many of those features tin't be had while keeping its operation strictly local. For some other alternative where a neutral wire installation is an option, the Z-Moving ridge version of the Leviton dimmer from our best smart switches page offers more features for roughly the same cost as Jasco's offering.
In the finish, not every situation calls for all the bells and whistles. The considerate, slim design of the Jasco Enbrighten switches makes for an extraordinarily like shooting fish in a barrel installation, while its minimalist appearance makes it alloy in with ordinary switches far more than many alternatives. If y'all value a uncomplicated device backed by a lengthy guarantee, solid structure, and frustration-free setup, the Jasco Enbrighten Z-Wave No Neutral Dimmer is your best bet.
Source: https://www.tomsguide.com/reviews/jasco-z-wave-no-neutral-smart-dimmer
Posted by: stovallhadvieterell.blogspot.com
0 Response to "Jasco Enbrighten Z-Wave No Neutral Smart Dimmer review"
Post a Comment